TRENDnet Network Router TFC 1000 User Manual

Quick Installation Guide  
TFC-1000  
TFC-210 Series  
TFC-2000 Series  
 
1. Avant de commencer  
Boîtier convertisseur fibre TFC-1000 pour convertisseurs des séries  
TFC-210 et TFC-2000:  
Contenu de l'emballage  
TFC-1000  
Guide d’installation rapide  
Cordon d’alimentation  
(courant alternatif)  
Support de montage et vis  
Convertisseur fibre des séries TFC-210 ou TFC-2000 :  
Contenu de l'emballage  
Convertisseur fibre  
Guide d’installation rapide  
Alimentation AC (9V DC, 700mA)  
1
Download from Www.Somanuals.Fcroamnç.aAisll Manuals Search And Download.  
2. Détails du produit  
Convertisseur fibre 10/100Base-TX vers 100Base-FX  
Multi/  
Mono-Mode  
Connecteur  
Fibre  
Nom du  
modèle  
Bilan de liaison Longueur d’onde  
Distance  
50/125um: 7,5dBm  
62,5/125um: 11dBm  
ST (Duplex)  
SC (Duplex)  
TFC-210MST  
TFC-210MSC  
TFC-210S30  
1310nm  
Multi-Mode  
Mono-Mode  
2Km  
(1270nm ~ 1380nm)  
50/125um: 8,5dBm  
62,5/125um: 8,5dBm  
1310nm  
(1260nm ~ 1360nm)  
30Km  
TX:1310nm  
(1280nm ~ 1355nm)  
RX:1550nm  
TFC-210S20D3  
TFC-210S20D5  
Mono-Mode  
Mono/  
bidirectionnel  
(1530nm ~ 1570nm)  
9/125um: 12dBm  
SC (Simplex)  
20Km  
TX:1550nm  
(1530nm ~ 1570nm)  
RX:1310nm  
(1280nm ~ 1355nm)  
Convertisseur fibre 00Base-T vers 1000Base-SX/LX  
Multi/  
Mono-Mode  
Fiber  
Connector  
Nom du  
modèle  
Bilan de liaison Longueur d’onde  
Distance  
50/125um:8,5dBm  
850nm  
550M  
220M  
TFC-2000MSC  
TFC-2000S20  
TFC-2000S50  
Multi-Mode  
Mono-Mode  
(830nm ~ 860nm)  
62,5/125um:8,5dBm  
1310nm  
(1270nm ~ 1355nm)  
SC (Duplex)  
9/125um:15dBm  
20Km  
50Km  
1550nm  
(1520nm ~ 1580nm)  
9/125um:19dBm  
TX:1310nm  
(1280nm ~ 1355nm)  
RX:1550nm  
(1530nm ~ 1570nm)  
TFC-2000S10D3  
TFC-2000S10D5  
Mono-Mode  
Mono/  
bidirectionnel  
SC (Simplex)  
9/125um:12dBm  
10Km  
TX:1550nm  
(1530nm ~ 1570nm)  
RX:1310nm  
(1280nm ~ 1355nm)  
2
Download from Www.Somanuals.Fcroamnç.aAisll Manuals Search And Download.  
3. Installation du matériel  
Installation de 2 convertisseurs fibre autonomes  
1. Branchez le câble fibre aux  
convertisseurs fibre.  
2. Branchez un câble Ethernet  
RJ-45 ente le port Ethernet  
des convertisseurs de fibre  
et le port Ethernet de votre  
switch (e.g TE100-S24R ou  
TEG-S240TX).  
3. Branchez l'adaptateur  
secteur à l'arrière du  
convertisseur fibre.  
Remarque:  
Câblage:  
Câble optique multimode: TFC-210MST, TFC-210MSC, TFC-2000MSC  
Câble optique monomode: TFC-210S30, TFC-210S50, TFC-2000S30,  
TFC-2000S50  
Câble optique à simple brin por TFC-210S20D3/D5, TFC-210S10D3/D5  
Les câbles TX et RX doivent être inversés par rapport à la connexion  
fibre opposée.  
Le TFC-210S20D3 doit être appareillé avec le TFC-210S20D5. Le  
TFC-2000S10D3 doit être appareillé avec le TFC-2000S10D5.  
Les ports TX et FX ports du Séries TFC-2000 ne supportent pas l’auto  
négociation. La connexion opposée cuivre et fibre doit être Gigabit.  
3
Download from Www.Somanuals.Fcroamnç.aAisll Manuals Search And Download.  
Installation d’un convertisseur fibre sur un  
switch  
1. Branchez le câble fibre du  
convertisseur fibre à un  
switch fibre  
(p. ex. TE100-S810Fi)  
2. Branchez un câble Ethernet  
RJ-45 ente le port Ethernet  
des convertisseurs de fibre  
et le port Ethernet de votre  
switch (e.g TE100-S24R ou  
TEG-S240TX).  
3. Branchez l'adaptateur  
secteur à l'arrière du  
convertisseur fibre.  
Remarque: Ceci ne s'appliqe pas aux TFC-210S20D3,  
TFC-210S20D5, TFC-2000S10D3 et TFC-2000S10D5.  
4
Download from Www.Somanuals.Fcroamnç.aAisll Manuals Search And Download.  
Installation d’un convertisseur fibre sur un PC  
1. Branchez le câble fibre du  
convertisseur fibre à un  
adaptateur fibre (p. ex.  
TE100-PCIFX+).  
2. Branchez un câble Ethernet  
RJ-45 entre le port Ethernet  
des convertisseurs de fibre  
et le port Ethernet de votre  
switch (e.g TE100-S24R ou  
TEG-S240TX).  
3. Branchez l'adaptateur  
secteur à l'arrière du  
convertisseur fibre.  
Remarque: Ceci ne s'appliqe pas aux TFC-210S20D3,  
TFC-210S20D5, TFC-2000S10D3 et TFC-2000S10D5.  
5
Download from Www.Somanuals.Fcroamnç.aAisll Manuals Search And Download.  
Installation d’un convertisseur fibre dans  
un boîtier  
1. A l'aide d'un tourne vis,  
dévissez le couvercle de la  
baie désirée sur le boîtier et  
enlevez le couvercle.  
Conservez les vis et le  
couvercle qui vous serviront  
plus tard si vous devez  
refermer la baie.  
2. Fixez le support de montage  
sur le côté du convertisseur  
fibre.  
3. Insérez le convertisseur  
fibre dans un logement  
disponible. Installez le  
convertisseur fibre avec le  
port fibre près du bas du  
boîtier. Serrez ensuite les  
vis pour fixer le  
convertisseur fibre.  
6
Download from Www.Somanuals.Fcroamnç.aAisll Manuals Search And Download.  
Montage du rack  
Le boîtier peut être installé dans un rack EIA standard de 19  
pouces qui peut être placé dans une armoire de répartition avec  
les autres équipements.  
1. Posez les supports de  
montage sur l'avant du  
boîtier (un de chaque  
côté), et fixez les avec les  
vis fournies.  
2. Mettez soigneusemet le  
boîtier dnas le rack.  
Allignez les supports sur  
les trous des vis du rack,  
utilisez ensuite les vis  
fournies avec le rack  
pour fixer le boîtier  
7
Download from Www.Somanuals.Fcroamnç.aAisll Manuals Search And Download.  
Branchement de l’alimentation  
1. Branchez le cordon  
d'alimentation fourni à  
l'arrière du boîtier.  
2. Branchez le cordon  
d'alimentation à une prise de  
courant.  
3. Mettez le switch sur ON pour  
alimenter le boîtier.  
Commutateur DIP  
Switch 1: ON: Mode Full Duplex TX  
OFF: Auto Négociation TX  
Séries  
TFC-210  
Switch 2: ON: Half Duplex FX OFF: Full Duplex FX  
Switch 3: ON: LLCF activé  
Switch 4: ON: Pure Mode  
OFF: LLCF désactivé  
OFF: Mode Switch  
Switch 1: ON: LLCF TX activé  
Séries  
TFC-2000  
OFF: LLCF TX (désactivé)  
Switch 2: ON: LLCF fibre activé  
OFF: LLCF fibre (désactivé)  
*Après avoir changé les paramètres du switch DIP, éteignez et rallumez  
leconvertisseur fibre.  
**LLCF signifie Link Loss Carry Forward.  
8
Download from Www.Somanuals.Fcroamnç.aAisll Manuals Search And Download.  
LLCF Function  
LLCF allows the network administrator to quickly  
troubleshoot the network connection based on the LEDs on  
the Fiber Converters. When the TX port link is down, the  
converter will force the fiber port link to shutdown. When the fiber  
port link is down, the converter will force the TX port link to  
shutdown.  
LLCF (Link Loss Carry Forward) Diagram  
Cable 2  
Cable 3  
Media  
Converter 1  
Media  
Converter 2  
Cable 1  
Cable 4  
Copper Cable  
Fiber Cable  
Below are examples on how to read the LLCF Function Table:  
Example 1: If LLCF is enabled on Fiber Converter 1 and disable  
on Media Converter 2, when Cable 1 link is down, Fiber Converter  
1's Copper and Fiber LED and Fiber Converter 2's Fiber LED will  
shut off. Fiber Converter 2's Copper LED remains on.  
Example 2: If LLCF is disabled on both Fiber Converters, when  
Cable 4 link is down, Fiber Converter 1's Copper and Fiber LED  
and Fiber Converter 2's Fiber LED remains on. Fiber Converter  
2's Copper LED will shut off.  
9
 
LLCF (Link Loss Carry Forward) Function  
Table  
Media Converter 1  
Media Converter 2  
Copper  
LED  
Fiber  
LED  
Copper  
LED  
Fiber  
LED  
Cable 1 Link Down  
Cable 2 Link Down  
Cable 3 Link Down  
Cable 4 Link Down  
Cable 1 Link Down  
Cable 2 Link Down  
Cable 3 Link Down  
Cable 4 Link Down  
Cable 1 Link Down  
Cable 2 Link Down  
Cable 3 Link Down  
Cable 4 Link Down  
Cable 1 Link Down  
Cable 2 Link Down  
Cable 3 Link Down  
Cable 4 Link Down  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
Media  
Converter 1  
LLCF Enable  
Media  
Converter 2  
LLCF Enable  
Media  
Converter 1  
LLCF Enable  
ON  
Media  
Converter 2  
LLCF Disable  
ON  
OFF  
ON  
OFF  
ON  
ON  
ON  
Media  
Converter 1  
LLCF Disable  
OFF  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
ON  
Media  
Converter 2  
LLCF Enable  
ON  
ON  
OFF  
ON  
Media  
Converter 1  
LLCF Disable  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
ON  
Media  
Converter 2  
LLCF Disable  
ON  
ON  
ON  
OFF  
10  
 
Specifications  
Fiber Converters  
TFC-210 series:  
IEEE 802.3 10Base-T  
IEEE 802.3u 100Base-TX & 100Base-FX  
Standards:  
TFC-2000 series:  
1000Base-T, 1000Base-SX/LX, IEEE 802.3ab/ 802.3z  
TFC-210 series:  
Power; 100Mbps, Full Duplex/ Collision, Link/Activity  
LED Indicators:  
TFC-2000 series:  
Power; 1000Mbps, Full Duplex/ Collision, Link/Activity  
TFC-210 series:  
10Base-T – UTP/STP Cat. 3, 4, 5  
100Base-TX – UTP/STP Cat 5  
100Base-FX – Multi-Mode –  
62.5/125ìm or 50/125ìm Multi-Mode Fiber Optic Cable  
100Base-FX – Single-Mode –  
9/125ìm Single-Mode Fiber Optic Cable  
Cable :  
TFC-2000 series:  
1000Base-T – UTP/STP: Cat. 5e or Cat. 6  
1000Base-SX– Multi-Mode –  
50/125ìm or 62.5/125ìm Multi-Mode Fiber Optic Cable  
1000Base-LX– Single-Mode –  
9/125ìm Single-Mode Fiber Optic Cable  
Dimensions:  
Weight:  
85mm × 125mm × 25mm (W × D × H)  
Around 300 g (10 oz.)  
9VDC, 700mA External Power Adapter  
Power:  
Operating: 0°C ~ 40°C (32°F ~ 104°F)  
Storage: -25°C ~ 70°C (-13°F ~ 158°F)  
Temperature:  
Humidity:  
10 ~ 90%, non-condensing  
CE, FCC  
Certifications:  
11  
 
Fiber Chassis  
Capacity:  
Ten bays for housing up to Ten media converters  
Material:  
Metal  
AC 100~240V AC, 50/60Hz  
90 Watts (Max)  
Power:  
Power Consumption:  
Cooling:  
One Fan  
440 mm × 266mm × 133 mm (W × D × H)  
Standard 19” Rack Mount Size (3U)  
Dimensions:  
Weight:  
6.4 kg (14.2 lb.)  
Operating: 0°C ~ 40°C (32°F ~ 104°F)  
Storage: -25°C ~ 70°C (-13°F ~ 158°F)  
Temperature:  
Humidity:  
10 ~ 90%, non-condensing  
CE, FCC  
Certification:  
12  
 
Troubleshooting  
Q1: After connecting the Fiber Converter, the LEDs do not turn on. What  
should I do?  
A1: First, check that the power outlet is receiving power. Second, make  
sure the power adapter is firmly connected to the Fiber Converter and  
the power outlet. Third, make sure the Ethernet and the Fiber cables  
are connected.  
Q2: All the LEDs are on, but I can't make a connection. What should I do?  
A2: First, verify that you are using the proper fiber cable (e.g. multi-  
mode fiber cable for multi-mode converters; single-mode fiber cables for  
single-mode converters). Second, verify that the TX and RX cables  
have been reversed on the opposite Fiber connection. Third, power  
down the Fiber Converters and the switches. Wait 15 seconds, then  
plug the switches and the Fiber Converters back in.  
Q3: What is the maximum distance that is supported by the Fiber Converter?  
A3: Please refer to Product Detail for distance information.  
Q4: After connecting the Chassis to a power outlet, the LEDs do not turn on.  
A4: First, check that the power outlet is receiving power. Second, make  
sure the power cord is firmly connected to the chassis and the power  
outlet. Third, make sure the power switch is flipped to the ON position.  
If you still encounter problems or have any questions please contact TRENDnet's  
Technical Support Department.  
13  
 
Limited Warranty  
TRENDnet warrants its products against defects in material and workmanship,  
under normal use and service, for the following lengths of time from the date of  
purchase.  
Fiber Chassis / Fiber Converters - 5-Year Warranty  
If a product does not operate as warranted above during the applicable  
warranty period, TRENDnet shall, at its option and expense, repair the  
defective product or deliver to customer an equivalent product to replace the  
defective item. All products that are replaced will become the property of  
TRENDnet. Replacement products may be new or reconditioned.  
TRENDnet shall not be responsible for any software, firmware, information, or  
memory data of customer contained in, stored on, or integrated with any  
products returned to TRENDnet pursuant to any warranty.  
There are no user serviceable parts inside the product. Do not remove or  
attempt to service the product through any unauthorized service center. This  
warranty is voided if (i) the product has been modified or repaired by any  
unauthorized service center, (ii) the product was subject to accident, abuse, or  
improper use (iii) the product was subject to conditions more severe than those  
specified in the manual.  
Warranty service may be obtained by contacting TRENDnet office within the  
applicable warranty period for a Return Material Authorization (RMA) number,  
accompanied by a copy of the dated proof of the purchase. Products returned  
to TRENDnet must be pre-authorized by TRENDnet with RMA number marked  
on the outside of the package, and sent prepaid, insured and packaged  
appropriately for safe shipment.  
14  
 
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT  
OPERATE AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY  
SHALL BE, AT TRENDNET’S OPTION, REPAIR OR REPLACEMENT. THE  
FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN  
LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN  
FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE,  
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE. TRENDNET NEITHER ASSUMES NOR  
AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER  
LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,  
MAINTENANCE OR USE OF TRENDNET’S PRODUCTS.  
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS  
TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN  
THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR  
ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR  
TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY  
OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY  
ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.  
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW  
TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY  
LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING  
NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL,  
OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR  
PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR  
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH  
THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE,  
FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES,  
AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF  
THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS  
DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF  
ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL  
PURPOSE.  
Governing Law: This Limited Warranty shall be governed by the laws of the  
state of California.  
Note: AC/DC Power Adapter, Cooling Fan, Cables and Power Supply carry a  
1-Year Warranty  
15  
 
Certifications  
This equipment has been tested and found to comply with FCC and CE  
Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference.  
(2) This device must accept any interference received. Including  
interference that may cause undesired operation.  
Waste electrical and electronic products must not  
be disposed of with household waste. Please  
recycle where facilities exist. Check with you  
LocalAuthority orRetailer forrecycling advice.  
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV  
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS  
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY  
TO OPERATE THE EQUIPMENT.  
ADVERTENCIA  
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador  
de alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al  
mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador  
de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria  
existente en el pais o zona de instalación.  
 
TRENDnet Technical Support  
Toll Free Telephone: 1(866) 845-3673  
.
US Canada  
24/7 Tech Support  
.
.
.
.
.
Europe (Germany France Italy Spain Switzerland UK)  
Toll Free Telephone: +00800 60 76 76 67  
English/Espanol - 24/7  
Francais/Deutsch - 11am-8pm, Monday - Friday MET  
Telephone: +(31) (0) 20 504 05 35  
Worldwide  
English/Espanol - 24/7  
Francais/Deutsch - 11am-8pm, Monday - Friday MET  
Product Warranty Registration  
Please take a moment to register your product online.  
20675 Manhattan Place  
Torrance, CA 90501  
USA  
Copyright ©2007. All Rights Reserved. TRENDnet.  
 

Taylor Refrigerator C708 User Manual
Toastmaster Bread Maker 1188 User Manual
Toshiba All in One Printer E STUDIO556 User Manual
TP Link Network Router td8817 User Manual
Triarch Indoor Furnishings 25983 User Manual
Tricity Bendix Microwave Oven TRIC700W User Manual
Tripp Lite Computer Accessories NB1005BK User Manual
Uniden Cordless Telephone EXP2240 User Manual
Vermont Casting Ventilation Hood DVA4136 User Manual
Visioneer Scanner XP 470 User Manual